Shaft hardening by high frequency induction hardening equipment

Speaking of the shaft, everyone knows that it is an important part of the car. It must have high hardness, wear resistance and service life. For this reason, we often use high-frequency induction hardening equipment to quench and heat treat the half shaft. Zhengzhou Gou's is a manufacturer specializing in the production of high-frequency induction hardening equipment. Our equipment technology is quite advanced in the field of shaft hardening. Brazilian customers have purchased our 50kw high-frequency induction hardening equipment for shaft hardening.

Advantages of high frequency induction hardening equipment

1. Fast heating speed, uniform heating (speed can be adjusted and controlled).

2. Easy to install, just connect the power supply, induction coil and water inlet and outlet pipes; small size, light weight, easy to use.

3. The operation is simple and can be learned in a few minutes

4. Quick start, heating can be started after water and electricity are turned on.

5. Less power consumption, about 70% less power than old-fashioned tube high-frequency equipment, the smaller the workpiece, the less power consumption.

6. Wide heating, can heat all kinds of metal workpieces (change the detachable induction coil according to the different working switches).

7. The temperature is controllable, the heating temperature of the workpiece can be controlled by setting the heating time, so that the heating temperature can be controlled to a technical point.

8. Good effect, very uniform heating, fast heating, less oxide layer, no waste after quenching.

9. Full protection, with overvoltage, overcurrent, overheating, water shortage and other alarm indications, and automatic control and protection.

10. Eliminate high voltage, avoid the step-up transformer that generates nearly 10,000 volts of high voltage, and the safety is very high.

The high-frequency induction hardening equipment produced by Zhengzhou Gou's has complete functions and is easy to operate. It can not only perform quenching heat treatment on shafts, but also perform diathermy heat treatment on bars, bolts, etc., and is widely used. If you want to buy such equipment, if you want to know more detailed information, you can contact us.