Brazilian customers use 50kw high frequency induction hardening machine to quench and heat treat the shaft

When it comes to the shaft, I believe everyone can say a lot, such as it is an important part of the car, its working environment is very harsh, it requires high wear resistance, high hardness, high service life, etc. . But how to improve its service life and wear resistance, do you know? At this time, many people shook their heads. We usually use a high-frequency induction hardening machine to quench and heat-treat the shaft to meet its working requirements. A Brazilian customer purchased a 50kw high-frequency induction hardening machine to harden the shaft.

At this time, someone will ask him why he needs to use a 50kw high-frequency induction hardening machine, is it not possible to use other ones? The shaft to be quenched by the Brazilian customer has a diameter of 40mm and a quenching depth of 2-2.3mm. We recommend a 50kw equipment for them based on these specifications and quenching speed. If you use equipment less than 50kw, then the equipment will not be able to carry the sensor for the 40mm shaft. Even if it is driven, the quenching effect will not be very good. If you use equipment greater than 50kw, a larger one may make the quenching effect better. , but its price will increase accordingly. If it is too large, it will cause a waste of resources. Therefore, it is necessary to choose a suitable induction heating machine for the heat treatment of the workpiece.

Compared with the tube-type high-frequency induction heating equipment of the same power level, the high-frequency induction hardening machine reduces the volume of the IGBT high-frequency by 1/2 and the weight by 2/3. Save water by 40%, save electricity by 30%--40%, occupy a small area, easy to operate, and can be learned in a few minutes, and the shaft is quenched by a high-frequency induction quenching machine, and the quenching speed is very fast, so fast The high speed effectively avoids the oxidation and decarburization of the shaft during the quenching process, ensures the quenching effect, and meets the working needs of the shaft. What's more, we can adjust the power of the equipment according to the needs to make the equipment meet the requirements.