02

2019-07

Application And Development Of Induction Heating Technology-3

3. Application in automobile manufacturing The booming automotive industry has brought unprecedented opportunities for the development of the automotive parts industry. Induction heating technology is also being used more and more widely in...

02

2019-07

Application And Development Of Induction Heating Technology-2

2.Induction heating advantages The first is low energy consumption. The actual billet heating efficiency of the induction melting furnace and the induction diathermy furnace can reach 65% to 75%, while the flame furnace and various chamber ...

02

2019-07

Application And Development Of Induction Heating Technology-1

As an emerging discipline, induction heating has been used in the past 30 years. In today's energy shortage, its importance is particularly prominent, and technology is rapidly increasing and its use is increasingly widespread. China began to ...

02

2019-07

Induction Heating Principle And Its Application

What is induction heating? The induction heating process works on a combination of electromagnetic induction and Joule heating. The induction heating process is a non-contact process that uses a principle of electromagnetic induction to hea...

02

2019-07

Tissue Transformation During Heat Treatment Of Steel-5

③Continuous cooling transformation of subcooled austenite (CCT curve) 1.Continuous cooling transition diagram of subcooled Austrian E body Ps: a→p start line Pf: a→p termination line K: termination line of pearlescent body tran...

02

2019-07

Tissue Transformation During Heat Treatment Of Steel-4

②Factors affecting C-curve The C curve reflects the stability and decomposition transformation characteristics of austenitecharacteristics of austenite, which depend on the chemical composition of austenite and the state of austenite when h...

02

2019-07

Tissue Transformation During Heat Treatment Of Steel-3

Two: structural transformation of steel during cooling a.Continuous processing b.Isothermal treatment Isothermal transformation of supercooled austenite Factors affecting C curve Continuous cooling transition of subcooled austen...

02

2019-07

Tissue Transformation During Heat Treatment Of Steel-2

1.2 Austenite grain size and control 1.Grain size The measure of grain size in a crystal, usually expressed as length, area, volume, or grain size level. 2.Initial grain size, actual grain size and essential grain size Initial ...

02

2019-07

Tissue Transformation During Heat Treatment Of Steel-1

Heat treatment of steel 1.structural transformation of steel during heating 2. structural transformation of steel during cooling 3. common heat treatment of steel 4. surface heat treatment of steel Heat treatment refers to a the...

27

2019-06

Effective Hardened Layer Depth Level And Its Application

Depth level(mm) and Application: 1.0.4-1.0mm: Small shafts with a diameter of 14mm or less, splines with a modulus of less than 1.5, internal splines, car steering racks and other small car parts. Mainly used to improve the wear resistance ...