03

2020-04

3 Sets 60kw Induction Heater Were Sold To Pakistan

Today we receive a PO from Pakistan customer,even in the special time,to keep their promise,they send to us. This customer ordered 3 sets 60kw machine to heating bars,because they have mass production. Their workpiece size is diameter 42mm,...

29

2019-10

Effect Of Electromagnetic Stirring Device On Aluminum Furnace

1, Since electromagnetic stirring is non-contact agitation, there is no contamination of the melt during the agitation process, which is of great significance for smelting high-purity aluminum and aluminum alloy. 2, Electromagnetic stirring...

29

2019-10

Gear Shaft Peeling Failure Analysis And Preventive Measures

Overheating occurs in the quenching and heating of the gear shaft. After quenching, coarse martensite needles and a large amount of retained austenite are produced. The thermal stress generated during grinding causes the retained austenite to ...

21

2019-10

Rebar Induction Heating Machine For Jordan Client

oday, we got a customer from Jordan who needs induction heating machine for rebar producing and he paid a visit to our company. Based on the specific requirements and the required heating temperature 800-900℃, we recommend our 300kw inducti...

21

2019-10

Characteristics Of Ion Nitriding Process For Cast Iron Dies

The ion nitriding process of cast iron and steel is basically the same, but according to the characteristics of ion nitriding of cast iron material, the ion nitriding process used has its own characteristics. 1, before purification treatmen...

05

2019-10

800kw Bar Induction Heating Furnace And Cooling Towers For Oman Client

We just have a customer from Oman for automatic bar heating furnace. The customer required to use this bar heating furnace for the induction heating of bars. The size of bar is 104*104mm, 208mm long. And the machine needs three phase 380V, ...

28

2019-09

Auto Leaf Spring Heat Treatment Process And Specification

The automobile leaf spring is an elastic element. When deformed under load, the pieces slide relative to each other to generate friction and friction at the ends of the support, which can promote the attenuation of the frame vibration. However...

06

2019-09

Surface Quenching Of Gears

Gears suitable for gear surface quenching, including medium carbon structural steel and medium carbon alloy structural steel gears, low carbon structural steel and low carbon alloy structural steel by carburizing or carbonitriding gears. The d...

17

2019-08

Purchase For Bar Induction Heating Furnace From Russia

This week, we just got a customer from Russia who needs bar heating furnace and he paid a visit to our company. The bar heating furnace is applied for heat-transfer heat treatment at a relatively fast speed. The bar can be heated in just a few...

12

2019-08

Heat Treatment Stress And Its Classification

The heat treatment stress can be mainly divided into thermal stress and tissue stress. The heat treatment distortion of the workpiece is the result of the combined action of thermal stress and tissue stress. The state of heat treatment stress ...